Guides

Our ceramic transfers have a lacquer coat covering the whole sheet, so you need to cut around the individual prints to separate them out. To release the decal, the transfers have to be soaked in water. The decal will curl up initially and when it uncurls can be slid...

A range of decal papers is available for ceramic tranfers printing: Standard Waterslide Decal is a 170gsm paper for digital printing of ceramics. The toners will fuse to the paper during the printing process but normally need a Thick paper setting in order to adhere...

Our standard ceramic toner set consists of a cyan, magenta, yellow and black set used for the onglaze decoration of ceramics with a maximum firing temperature of around 860°C. An alternative unleaded toner set is also available and is compatible with the standard set...